Product Description
Setting times are approx.
Hot Mix - Red lid: 45-90 seconds
Reg Mix - Blue lid: 3-5 minutes
20 minute - Green lid: 20 minutes
MS-Plug is a cement-based hydraulic cement that is fast setting. It is used to instantly stop running water or seepage leaks in concrete or masonry. When mixed with clean potable water, STANDARD MIX sets in 3 to 5 minutes; HOT MIX in 45 to 90 seconds, 20 MINUTE MIX in approximately 20 minutes. Actual setting time depends on the temperatures of the dry powder, mixing water, and the structure to be patched. Cold temperatures will slow the setting time. Hot temperatures will accelerate it. Mixing water should be around 21 degrees Celsius. MS-Plug expands as it sets.
Uses
MS-Plug is used above or below grade, interior or exterior, to stop water seepage and flowing water in concrete and masonry. MS-Plug is an ideal patching material for manholes, sewers, concrete pipe, wells, retaining walls, water treatment plants, tunnels and basements.
Composition/Materials
MS-Plug is a blend of Portland cement, fine aggregates, and other ingredients modified to control initial and final set times.
Surface Preparation
All surfaces must be clean and free of dirt, dust, paint, and sealers that will inhibit the patching material from bonding. Dampen areas to be patched before applying MS-Plug. DO NOT retemper. MS-Plug is recommended for use when the temperature is 40 degrees F and falling.
