Created with Sketch. Created with Sketch.

Aerial Hardware

  • AED 26-09010 Clamp Lashing, "D" Bug Nuts

    Clamp Lashing, "D" Bug Nuts - MSI SI-2175

    Clamp Lashing, "D" Bug Nuts Messenger/lashing clamp for 1/4" to 7/16" messenger strand. Designed for easy and permanent termination of lashing wire to messenger strand. Constructed of high quality steel, mechanically plated.   ALLIED...

  • MSI SI-2174 Weaver K-1 Bonding Clamp

    Weaver K-1 Bonding Clamp

    Weaver K-1 Bonding Clamp  Features Used to bond #6 copper wire to 1/4" or 5/16" strand Constructed of high strength copper alloy Installation does not require removal of bolt Tin plated for use with dissimilar metals Installs with standard...

  • Lag Screw 1/4" x 2"

    Lag Screw 1/4" x 2" - MSI J8722

    Lag Screw 1/4" x 2" Square head lag screw 1/4" diameter gimlet thread x 2" long with gimlet point and upset shoulder Thread length is 1-1/2" Constructed of high quality steel, hot-dip galvanized. Galvanized per ASTM A-153.   ALLIED...

  • 1/2" Bell Spacer - AED 100-0016-02

    Bell Spacers

    Bell Spacers Cable Spacers are used in lashed cable construction providing a separation between cable and strand. Lower concave surface bears against the cable upper concave surface bears against under side of strand. Forte Bell Type.   1/2" =...

  • Straight Clamps, 1/4" Strand MSI SI-1740

    Straight Clamps, 1/4"-7/16" Strand - MSI SI-1740

    Straight Clamps, 1/4"-7/16" Strand MSI SI-1740 Suspension/messenger clamp, securely grips messenger strand to the pole Three-bolt messenger clamp DJ2C7 Series Tangent clamp mounted through center hole Mounting bolt (order separately) serves as...

  • Stainless Steel Strap - Maclean Senior Industries - ALLIED BOLT

    Stainless Steel Strap

    Stainless Steel Strap Used to strap CATV and telephone cable to steel strand in aerial construction Constructed of non-corrosive stainless steel Straps are .010" thickness x 3 ⁄4" wide and available in lengths from 10" to 78" Strap edges are...

  • Aerial Support Cable Tie 10" Length

    Aerial Support Cable Tie 10" Length

    Aerial Support Cable Tie The aerial support tie in black with integral 1/2" (12.7mm) spacer for support strand applications is made of weather-resistant polypropylene. It is 10.0" long and 0.45" wide (254.0 x 11.4 mm), features a releasable locking...

  • 5/8" Square Head Machine Bolt MSI J88

    5/8" Square Head Machine Bolt

    5/8" Diameter Bolt Ultimate Tensile Strength 13,550 lbs. Min Thread Length 6" Cone points for easier nut starting 22 threads per inch Bolts are supplied with one square nut assembled. Constructed of high quality steel, hot-dip galvanized...

  • Thimbleye, Threaded, 5/8" Nut MSI SI-4405

    Thimbleye Threaded 5/8" Nut - MSI SI-4405

    0.625" Thimbleye, Threaded, 5/8" Nut  Threaded Thimbleye® for attaching to 5/8" thru-bolts or threaded end of straight or angle Thimbleye® bolts for straight-away head guys. For attaching guy strands or deadends to poles. Used with...

  • 5/8" Square Nut MSI SI-5365

    5/8" Square Nut - MSI SI-5365

    5/8" Square Nut MSI SI-5365 DF1N SerieS For use with all galvanized hardware items, except anchor rods Hot-dipped galvanized steel for corrosion resistance IEEE Std C135.80™-2012 standard Accommodates Bolt Dia. 5/8" Ultimate Tensile...

  • Head, Locking, for ABSTRAP, Lashing Strap System, #1072 Head, Locking, for ABSTRAP, Lashing Strap System, #1072

    Locking Head Buckle for ABSTRAP Lashing Strap System

    Head, Locking, for ABSTRAP, Lashing Strap System 16″ Deltec Lashing Strap with Locking Head The buckle is used in conjunction with cut lengths of ab straps for supporting telephony cables to strand. The buckle consists of a high-strength...

  • Pig Ears--Guy Attachment MSI J25164

    Pig Ears-Guy Attachment - MSI J25164

    Pig Ears-Guy Attachment MSI J25164 Guy Hook (Pig's Ear) 2" x 3/16" Guy hook attachment Attaches to pole with machine bolt Dead-end attaches to the guy hook though the loop Hot-Dip Galvanized Steel (HDG) 11/16" Mounting Hole   ALLIED...

  • Screw Anchor Screw Anchor

    Screw Anchor

    Screw Anchor  - No Wrench  Integral forged eye anchor with a helix welded to the shaft. For manual or machine installation. Triple guy eye.   Application Table SKU HelixDiameter ShaftLength ShaftDiameter Ultimate...

  • Flat Drop Fiber Clamp - MSI SI-0972SBL

    Black Flat Drop Fiber Clamp- MSI SI-0972SBL

    Flat Drop Fiber Clamp Black Finish - MSI SI-0972SBL For use with fiber drop cables Black finish to easily distinguish from copper drop clamps. Specially designed removable shim firmly secures rigid fiber jackets. Stainless steel.   AED...

  • AED 5000 Universal Strandlink 1/4" "Pickle"

    Universal Strandlink 1/4" "Pickle" - MSI 5000

    Universal Strandlink Connector 1/4" "Pickle" - MSI 5000 Used for splicing applications with overhead or down guy wire Rated to hold a minimum of 90% of RBS of the strand used “All Grades" are recommended for use on common grade, SiemensMartin,...

    $11.60
    Add to Cart
  • 10" Aluminum Cable Tie - MSI SI-0939-10

    10"x1/4" Aluminum Cable Tie - MSI SI-0939-10

    10"x1/4" ALUMINUM CABLE TIE - MSI SI-0939-10 Used to support drop cables on the strand, pedestal, lock box or bundling of cables at the head end Reusable with integral buckle Made of aluminum Smooth edges to prevent injury or damage to...

  • DRIVE HOOK 7/16 X 4-3/4 - MSI J3316P DRIVE HOOK 7/16 X 4-3/4 - MSI J3316P

    DRIVE J HOOK 7/16 x 4-3/4 - MSI J3316P

    DRIVE HOOK 7/16 X 4-3/4 J hooks are used for supporting bail-type drop wire and deadend clamps from poles and crossarms. The J3316P drive hooks have rolled fetter drive threads and a pilot point for easy starting.   ALLIED 920 DIGI 920

  • Curved Suspension Clamps 3 Hole - MSI SI-1755

    Curved Suspension Clamps 3 Hole - MSI SI-1755

    Curved Suspension Clamps 3 Hole MSI SI-1755 Used for attaching strand to corner poles. Accepts 1/4" (6.6mm) to 7/16" (16mm) strand. Clamp consists of two mating plates, two track bolts with attached square nuts. Clamp plates are 1-11/16" wide and...

  • Split Bolt Connector #4

    Split Bolt Connector #4

    Split Bolt Connector #4 Used to make a bonding connection between two copper ground wires. Bolt and nut formed from high-strength corrosion resistant C210 Copper. Specially designed pressure bar provides high pull-out strength. Under torque,...

  • Fiberglass Comm Standoff Bracket Fiberglass Comm Standoff Bracket

    Fiberglass Comm Standoff Bracket

    Fiberglass Comm Standoff Bracket Fiberglass Brackets for your power and utility needs. Fiberglass Brackets offer value added solutions for supporting equipment to cable.   12" MSI G1MDA112DF - ALLIED 4869 18" DIGI G1MDA118DF - ALLIED 4871 24"...

  • AED 8051 10" Straight Thimbleye Bolt

    Straight Thimbleye Guy Bolt

    Straight Thimbleye Bolt The broad radius of the eye provides an excellent attachment point to deadend or guy messenger wire, guy strand or formed wire grips.  Thimble eye® bolts eliminate the need for thimbles, shackles, links and guy...

  • Split Bolt Connectors #6 MSI SI-2006

    Split Bolt Connectors #6

    Split Bolt Connector- S-6  High strength corrosion resistant copper alloy connectors for use in bonding applications Designed to provide high clamping force UL and CUL listed   ALLIED 854  DIGI 006413

  • B - 5/8 guy hook, Rams Head - MSI P135AXW

    5/8" B Guy Hook, Rams Head - MSI P135AXW

    5/8" B Guy Hook, Rams Head Used as a means of attaching guy wire to poles. Used for down and span guys. Not intended for back-to-back guying. Features smooth grooves to eliminate chafing of the strand. Accepts a wide range of strand diameters...

  • Curved Washer, 2.5" x 2.5"

    Square Curved Washer, 2.5" x 2.5" - MSI J6822

    Curved Washer, 2.5" x 2.5" DF4W Series Width: 2.5" Length: 2.5" Thickness: 3/16" Hole: 11/16" Accommodates Bolt Dia. 5/8" Used on poles to distribute the strain evenly over the pole surface Hot-dipped galvanized for corrosion resistance IEEE...

  • 5/16'' Strandvise - DIGI 5101 5/16" Steel Guy Wire Strandvise - DIGI 5101

    5/16" Steel Guy Wire Strandvise - DIGI 5101

    5/16'' Strandvise Rated to hold a minimum of 90% of RBS of approved strands. Used in applications for deadending or splicing overhead or down guy wires. “Universal” series connectors are recommended for use on Alumoweld and Extra High...

  • 3" x 10' Flanged Plastic U-Guard - ELM PE3UG

    3" x 10' Flanged Plastic U-Guard - ELM PE3UG

    3" x 10' flanged plastic U-Guard - ELM PE3UG U-Guard, 3″ x 10′, Polyethylene, Flanged Plastic U-Guards (risers) are designed to give non-conductive, high impact protection for utility power and communication cables...

  • 2" Sidewalk Guy Pole Plate (MSI SWGB-20-54) 2" Sidewalk Guy Pole Plate (MSI SWGB-20-54)

    2" Sidewalk Guy Pole Plate

    Sidewalk Guy Plate-Pole These cast iron fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained SWGB-20-54 pole plate is mounted with one 5/8"...

  • Bolt, Double Arming, 5/8"X24" - MSI J8874

    Double Arming Bolt 5/8" x 24" - MSI J8874

    Bolt, Double Arming, 5/8"X24" Double Arming Bolts are fully threaded and assembled with four square nuts. They are used in double crossarm construction to secure and lock in the spacing between the crossarms. The ends of the bolts can accept eyenuts for...

  • 3/4" x 30" Expanding Rock Anchor - MSI J3437 3/4" x 30" Expanding Rock Anchor - MSI J3437

    3/4" x 30" Expanding Rock Anchor - MSI J3437

    3/4" x 30" Expanding Rock Anchor Used as a heavy-duty anchor in solid rock. Anchor consists of two Malleable castings and a Triple Eye Anchor Rod. All components are hot dip galvanized to meet ASTM Specification A153. To install anchor, drill...

  • Drop Wire Hook - MSI SI-1130

    B Drop Wire Hook - MSI SI-1130

    Drop Wire Hook - MSI SI-1130 Drop Wire Hook, Specially shaped hook for attaching drop wire clamps or drop wires to houses. Install with 5/16" lag screw.   AED SI-1130 AED 666 ALLIED 666 DIGI SI-1130 DIGI 666

  • SINGLE EYE FORGED ANCHOR ROD

    Single Eye Forged Anchor Rod 5/8" x 5' - MSI J7415

    SINGLE EYE FORGED ANCHOR ROD 5/8" X 5'  Thimble eye anchor rod with nut for guying utility poles. Used with expanding anchors. Helix anchor, twist anchor, screw anchor. 5/8 inch x 60 inch Machine Bolt The rods are threaded 3 1/2 " and are...

  • Deadend Bracket Assembly with 4 Brackets (ALLIED 7395) Deadend Bracket Assembly with 4 Brackets (ALLIED 7395)

    Deadend Bracket Assembly with 4 Brackets

    Deadend Bracket Assembly with 4 Brackets Used to terminate aerial strand or guy strand where obstructions exist (ie; Power Utility Guards) Comprised of two stamped brackets that are joined to an assembled roller with a drilled Machine Bolt and Cotter...

    $185.80
  • Large Flat Fiber Optic Drop Wire Clamp - MSI SI-0966PS

    Large Flat Fiber Optic Drop Wire Clamp - MSI SI-0966PS

    Large Flat Fiber Optic Drop Wire Clamp - MSI SI-0966PS For use with fiber drop cables Black finish to easily distinguish from copper drop clamps. Specially designed removable shim firmly secures rigid fiber jackets. Stainless steel. Cable Size: up to...

  • Expanding Bust Anchor 8" Hole - MSI J8135

    Expanding Bust Anchor 8" Hole - MSI J8135

    ANCHOR EXPANDING BUST 8 INCH HOLE Expanding (Bust) Anchors are made for installation in holes augured. One piece formed anchor with wings and a base. A retainer on the bottom holds the nut from the forged eye rod (sold separately). During installation,...

  • 6-inch Expanding Bust Anchor - MSI J0870 6-inch Expanding Bust Anchor - MSI J0870

    6-inch Expanding Bust Anchor - MSI J0870

    6-inch Expanding Bust Anchor Eight-way expanding anchors are easily installed and offer excellent holding power. Anchors slide into the earth with minimum soil disturbance. The ribbed design of the flukes prevents distortion during installation...

  • 1/4" Strandlink Universal .215-.270

    1/4" Strandlink Universal .215-.270

    1/4" Strandlink Universal .215-.270 Features:  Rated to hold of minimum of 90% of RBS strand used Application: For splicing applications with overhead or down guy wire "Universal Grade" are recommended for use with alumoweld, aluminized,...

  • 11/16" x 18" Ship Head Auger Bit - ALLIED 52718 11/16" x 18" Ship Head Auger Bit - ALLIED 52718

    11/16" x 18" Ship Head Auger Bit - ALLIED 52718

    11/16" x 18" SHIP HEAD AUGER - ALLIED 52718 Used for high-speed drilling in wood. Specially designed to bore through telephone poles treated with creosote. Features a sharp rugged cutting edge, and a screw point. 7/16" Hex Shank diameter...

  • Jameson Pole Mount Corner Bracket - Single

    Jameson Pole Mount Corner Bracket

    Jameson Pole Mount Corner Bracket Single Dual Designed to save vertical space on crowded joint occupied poles, brackets are ideal for mounting corner blocks. Nylon strap and ratchet make brackets easy to use and bracket is contoured to fit pole...

    $191.87 - $197.87
    Choose Options
  • Loop Forming Bender Tool 1" - DIGI 3195 Loop Forming Cable Bender Tool 1" - DIGI 3195

    Loop Forming Cable Bender Tool 1" - DIGI 3195

    Bender Loop Forming, Cable, 1" Bending board - DIGI 3195 Lemco's M-Series Loop Forming Tool (M-3195) with easy-grip pawl ensures positive engagement into gear rack. Bronze bushings provide smooth operability and prevent galling. Frame and gear rack...

  • Aerial Support Tie 12.4" Length (HT 111-01671) Aerial Support Tie 12.4" Length (HT 111-01671)

    Aerial Support Tie 12.4" Length

    HT 111-01671 Aerial Support Tie 12.4" Length - Black 500/bag (PA66HIRHSUV) Aerial Support ties feature a built-in spacer to separate cables from the support wire and prevent abrasion. A one-piece design, combining the tie and spacer into one part,...

  • Aerial Support Tie 17.4" Length (HT 111-01672) Aerial Support Tie 17.4" Length (HT 111-01672)

    Aerial Support Tie 17.4" Length

    HT 111-01672 Aerial Support Tie 17.4" Length - Black 500/bag (PA66HIRHSUV) Aerial Support ties feature a built-in spacer to separate cables from the support wire and prevent abrasion. A one-piece design, combining the tie and spacer into one part,...

  • E Drop Wire Clip - MSI SI-0987

    E Drop Wire Clip - MSI SI-0987

    E DROP WIRE CLIP - MSI SI-0987 Drop wire clip is used to secure drop wire to wood or masonry surfaces. Constructed of high quality steel, mechanically plated. Cable Size Max: .200" x .390"   AED SI-0987 ALLIED 9086 DIGI SI-0987

  • U CABLE GUARD STRAP SZ 3 - ALLIED 9005-U3 U CABLE GUARD STRAP SZ 3 - MSI SI-0078

    U CABLE GUARD STRAP SZ 3 - ALLIED 9005-U3

    U CABLE GUARD STRAP SZ 3 - Sold Individually Constructed of high quality steel, hot-dip galvanized Used in securing U-cable guards to poles   A: 1-5/16" B: 2-3/8" C: 1" D: 3-5/16" E: 3/16" F: 11/32" R: 3/8" S: 1/2"   MSI...

  • Double Arming Bolt 5/8" x 36" - MSI J8881

    Double Arming Bolt 5/8" x 36" - MSI J8881

    Double Arming Bolt 5/8" x 36" - MSI J8881 13,500 lbs tensile strength hot dip galvanized , coned for driving into poles, comes with 4 square nuts.  Double Arming Bolts are fully threaded and assembled with four square nuts. They are used in double...

  • U CABLE GUARD STRAP SZ 2 - ALLIED 9005-U2 U CABLE GUARD STRAP SZ 2 - MSI SI-0077

    U CABLE GUARD STRAP SZ 2

    U CABLE GUARD STRAP SZ 2 - Sold Individually Constructed of high quality steel, hot-dip galvanized Used in securing U-cable guards to poles   A: 1-1/32" B: 2-3/8" C: 3/4" D: 2-5/16" E: 1/8" F: 9/32" R: 3/8" S: 3/8"   MSI...

  • STAPLE 1-1/4 X 1/4 X .114 - MSI J6493

    Staple 1-1/4 x 1/4 X .114 - MSI J6493

    STAPLE 1-1/4 X 1/4 X .114 ROLLED POINT COPPER COATED  Used to secure ground wire and ground wire to utility poles. Copper is electrically deposited on staple to ensure a smooth long-lasting coating used to secure Bare ground...