Product Description
J2 Cable Lasher with Chest
The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Can be used for new installs or with existing cable in place. Will lash any single or multiple aerial cables up to 3 in. (76 mm) diameter across on any suspension strand from 1/4 in. (6 mm) to 7/16 in. (11 mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7 mm) strand if necessary.
- Will lash any single or multiple aerial cables up to 3 in. (76 mm) diameter across on any suspension strand from 1/4 in. (6 mm) to 7/16 in. (11 mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7 mm) strand if necessary.
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Each of two recessed magazines will hold a 1200 ft. coil of .045 in. (365 m of 1.1 mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
- Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
- J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
- Pre-drilled and tapped at the factory for mounting of the lasher guard or "halo". For use when lashing in overgrown areas.
- The J2 is fully serviceable to "good-as-new" specifications.
- The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
- Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual
Ordering Information:
| P/N | Description | Wire Dia | Weight |
|---|---|---|---|
| 86070 | J2 Cable Lasher Standard | .045 | 46 lbs. (20.9kgs) |
| 86071 | J2 Cable Lasher Modified for 450 ft. of .065 in. wire |
065 | 46 lbs. (20.9kgs) |
| 86072 | J2 Cable Lasher Modified for 1/2 " Strand |
.045 | 46 lbs. (20.9kgs) |
| 86074 | J2B Cable Lasher Without strand lock and relieved for overlashing |
.045 | 46 lbs. (20.9kgs) |
| 28120 | Housing Handle for J2B | 1.5 lbs. (.7kg) | |
| 03165 | Bridle Rope Assembly only (photo) |
3 lbs. (1.4kg) | |
| 08189 | Chest only | 19 lbs. (8.6kgs) | |
| J2 Cable Lasher w/Chest (Shipping Weight) | 65 lbs. (29.6kgs) | ||
| 70190 | Towing Lanyard 35 ft. (optional)(250 lbs. WLL) | 6 lbs. (2.7kgs) | |
| 70012 | Lasher Guard "Halo" (optional) | 3 lbs. (1.4kg) |
